Resources & Downloads
Data Sheets
High Energy Pyroelectric Sensors 100µJ to 40J Datasheet(346.7 kB, PDF) Absorption and Damage Graph(220.6 kB, PDF) Wavelength and Repetition Rate Chart(178.6 kB, PDF)
3D Product Models
Drawings & CAD
PE50-DIF-C & PE50BF-DIF-C Drawing(129.3 kB, PDF)
Catalogs
Energy Sensors Catalog(4.6 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF)
Technical Notes
Power/Energy Meters: Why Damage Specs are Derated for Larger Beams 5 Situations Where Laser Performance Measurement is Necessary Effect of Ambient Conditions on Laser Measurements Oscilloscope Adapter for Ophir Pyroelectric Sensors How to Properly Select a Laser Power or Energy Sensor
Technical Articles
Ophir Power/Energy Meter Calibration Procedure and Traceability/Error Analysis Laser Measurements in Materials Processing
Tutorials
Related Products
Heat Sink
Screws onto rear of PE-C series sensors allowing working at over 50% higher average powers
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7Z08267Heat Sink, PE25-C and PE50-C Series |
Scope Adapter
Plugs in between the PE sensor and power meter. Provides BNC output to scope to see every pulse up to the maximum frequency of the sensor.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7Z11012Scope Adapter, Connect PE to Oscilloscope |
Beam Splitter Assembly for Pyro
Beam Splitter Assembly to measure pulsed laser sources too energetic for direct measurement. The reading with the Beam Splitter can be calibrated by setting the laser to a lower energy that will not damage the sensor and then taking a measurement with the beam splitter and without and taking the ratio.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7Z17001Beam Splitter Assembly, Pyroelectric Energy Sensor |
Nova PE-C Adapter
The adapter plugs between the Nova D15 socket and the smart plug of the PE-C and PD-C sensors to allow the Nova to operate with these sensors.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7Z08272Energy Sensor Adapter, Connect PE-C and PD-C to Nova Meter |
PE-C to PE Size Adapter
The newer PE-C series sensors have a Ø62 mm diameter. The older PE series sensors have a Ø85 mm diameter. This adapter allows using the PE-C type sensors in jigs and setups that were originally designed for PE sensors.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7Z08273PE-C to PE Size Adapter, Ø62 to Ø85 mm |
Fixed extension cables for Pyro Energy Sensors
Order a fixed extension cable along with sensor to receive a different cable than the standard 1.5 m cable.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7E01174AFixed extension cable for Pyro Energy Sensors, 3 m Length, Connect to Power Meter | |||||
| 7E01174BFixed extension cable for Pyro Energy Sensors, 5 m Length, Connect to Power Meter | |||||
| 7E01174CFixed extension cable for Pyro Energy Sensors, 10 m Length, Connect to Power Meter |
Modular extension cables for Pyro Energy Sensors
The extension cables can be ordered separately from the sensors.
Extended Warranty for Sensor
Customers that purchase the above items also consider the following items. Ophir-Spiricon meters and sensors include a standard manufacturers warranty for one year. Add a one year Extended Warranty to your meter or sensor, which includes one recalibration.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | XWAR-SENSORExtended Warranty for Sensor |
