200-850 nm LED and Laser Radiometer with Ø8 mm Aperture
200-850 nm LED and Laser Radiometer with Ø8 mm Aperture
The PD300RM-UV LED and laser radiometer replaces traditional radiometers which are calibrated to a single wavelength (254nm, 365nm, etc.), offering calibration over a broad spectral range, which the user can access by entering any wavelength in the calibration range. The PD300RM is a general purpose circular geometry photodiode irradiance and dosage sensor with an 8mm aperture and a cosine corrected diffuser. Its spectral range is 200-850nm and its irradiance measuring range is 100nW/cm² - 250mW/cm². The sensor comes with a 1.5 meter cable for connecting to StarBright & StarLite meters or Juno+ PC interface.
- 8 mm diameter aperture and a cosine corrected diffuser
- 200 to 850 nm spectral range
- Measure LED irradiance and dosage See All Features
Specifications
- Irradiance Range100 nW/cm² - 250 mW/cm²
- Spectral Range200-850 nm
- Maximum Average Power Density10 W/cm²
- Aperture SizeØ8 mm
- DimensionsØ35 x 21 mm
- Response Time0.2 s
- f'2 Cosine Correction Factor Accuracy5%
- Thermal Coefficient-0.03%/°C
- CE ComplianceYes
- China RoHS ComplianceYes
- UKCA ComplianceYes
Features
Measuring LED Irradiance and Dosage with the PD300RM
Does your application involve irradiating a target surface with an LED? UV curing of adhesives is one example of such an application. Ophir’s new PD300RM sensor family measures irradiance and dosage for UV and Visible LEDs. This video explains what the PD300RM does, what is so unique about it, and how to use it.
Measuring Power of LEDs: UV, Visible and NIR
Measuring the emitted power of an LED can be tricky. It is different in some important ways from measuring the power of a laser beam. This video shows you how to use the Ophir 3A-IS Integrating Sphere Sensor, along with the Auxiliary LED accessory, to easily make accurate measurements in LED applications.
Frequently Asked Questions
- Can I measure white LEDs with the PD300RM?Answer
No, white LEDs have wideband spectrum. Try the PD300CIE for illuminance (lux) measurement.
- Can I measure a mercury lamp with the PD300RM-UV?Answer
No, the PD300RM is a broadband detector. It doesn’t have a filter to isolate specific emission lines such as mercury lamp lines (365nm, 254nm) or spectral bands such as UVA, UVB. Custom solutions with filters are available. Contact Ophir for more information.
- Can I measure a laser with the PD300RM?Answer
Yes, in applications where a laser beam is diverging or diffused, such as laser projectors, PD300RM can be used to measure the irradiance with high accuracy. However, it is not applicable for measuring a collimated laser beam. Use the PD300 for that.
- What is the purpose of the PD300RM's diffuser?Answer
In order to get a good cosine corrected response, a diffuser is placed in front of the photodiode to convert directional light into lambertian diffused light, thus eliminating any sensitivity to direction.
- Do I need to recalibrate my instrument? How often must it be recalibrated?Answer
Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.
- What is the accuracy of the PD300RM for LEDs and for lasers?Answer
The accuracy when measuring irradiance of laser sources is easy to determine because lasers have very narrow bandwidth and their wavelength is well known. The accuracy for laser measurement is given in the specifications. When measuring the irradiance of LED sources, other issues such as bandwidth and wavelength tolerance come into play. For more details and specifications see the white paper.
Accessories
Female SM1 to SM1 Adapter
For mounting to SM1 optical components and systems.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 1G02260Female SM1 to SM1 Adapter |
Thermal Sensor Cables
Order a cable of a different length along with the sensor to receive a cable other than the standard 1.5 m length.
Extended Warranty for Sensor
Customers that purchase the above items also consider the following items. Ophir-Spiricon meters and sensors include a standard manufacturers warranty for one year. Add a one year Extended Warranty to your meter or sensor, which includes one recalibration.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | XWAR-SENSORExtended Warranty for Sensor |
Resources
Catalogs
Power Sensors Catalog(11.2 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF)
